It is necessary to test the Chair Mould(FURNITUREMOULD) manufacturing, and the operator usually needs to evaluate the specific situation of the chair mould to avoid unnecessary cost and time increase in the process of modifying the chair mould. The evaluation also includes the setting of machine process parameters. In order to make up for the shortcomings in the chair mould design, the operator may make incorrect settings without knowing it. The production and operation process of the equipment is abnormal, because the parameter setting range required to produce qualified products is very small. Any slight deviation in parameter setting may lead to the quality of the final product far exceeding the allowable error range, and the actual production cost thus generated is often much higher than the cost incurred by optimizing the chair mould in advance. Defects in moulded products are caused during plasticization and injection moulding, but sometimes they are also related to improper design of chair mould. Possible influencing factors include: number of mould cavities. The design of the cold/hot runner system, the type, location and size of the entrance, and the structure of the product itself. In order to avoid product defects caused by chair mould design, we need to analyze the chair mould design and mould process parameters when making the chair mould. The purpose of mould testing is to find out the optimized process parameters and chair mould design. Even if the factors such as materials, machine settings or environment have changed, the batch production environment can still be stable and uninterrupted, not only to obtain a good sample. This is very important. The basic steps of mould testing: set the temperature of the material barrel. The initial barrel temperature setting must be based on the recommendation of the material supplier. Different manufacturers and different brands of the same material may have considerable differences, and material suppliers often have quite in-depth research and understanding of their own materials. Users can make basic settings according to their recommendations, and then make appropriate fine adjustments according to specific production conditions. If you are interested in our products, you can click Furniture Mould to learn more information.
