Frequent maintenance and maintenance of electric vehicles can increase the life of electric vehicles. Now, Electric Bike Manufacturer introduces how to maintain and maintain electric bikes.1. Frequently check the front and rear tires:Try not to use zero starting (ie starting on the spot) for electric bicycles, especially at load-bearing and uphill places. This is because when starting, the motor must first overcome the static friction force. At this time, the current is relatively large, close to or even reach the resistance current, so that the battery works with high current and accelerates the damage of the battery. Try to reduce the frequency of frequent braking and re-acceleration, and don't overload and speed (deliberately pull out the speed limit device). When riding, try to avoid the impact on the controller, contacts, connectors, and motor bearings due to excessive vibration.2. Replenish power in time after riding:When an electric vehicle battery is in a state of “starvation” due to a significant lack of power, it will cause a large deficit in the battery. Before charging, insert the charger into the charging base of the electric vehicle, and then connect the charger to AC power. After the battery is basically fully charged, it should be kept floating for at least two or three hours to ensure that it is fully charged, but not more than 24 hours. In addition, in summer, you should avoid charging immediately after driving, and the charging time is generally eight hours, and do not overcharge.3. Frequently check the front and rear brakes:It is sensitive and reliable, with suitable stroke, and the wheel hub cannot be worn when the brake is not braked; the brake shoe is excessively worn and needs to be replaced in time. Pay attention to whether the front and rear wheels rotate smoothly and smoothly. If you move lightly, you should "idle" for a long time. There will be a tendency to reverse when you stop, otherwise you should adjust the axle gear. Proper adjustment of the above two can reduce friction, save electric energy, and increase driving mileage. Turn off the electric door lock when not riding to avoid no-load power consumption of the controller, battery indicator and other circuit components.4. Store the vehicle indoors as much as possible:Electric vehicles should be protected from rain and sun, and in severe weather, prevent water ingress into the motor battery and excessive sun exposure. Do not overuse the electric car, let the electric car recuperate and restore the battery's chemical properties. It is necessary to avoid deep discharge of electric vehicle battery caused by continuous long-distance riding for a long time. If possible, it is possible to supplement the electric energy in the middle. If you do not ride for a long time, you should charge it every half month.5. Check the tightness of the chain before using the electric bicycle:Feel and observe whether the chain shaft of the chain rotates flexibly and whether the chain links are severely corroded. Wipe the vehicle frequently, oil regularly the parts that need lubrication such as brakes, chain transmission mechanism, etc., tighten the nuts and screws of the easily loose front and rear axles, handlebars, etc., and regularly wipe the electroplated metal surface with rust-removing and anti-rust oil.The above content is organized and shared by Electric Motorbike With Brushless Motor Manufacturer, hoping to help those in need.