When a challenge entails other assemblies, components, or modules, things get more complex. products like admirers, cooling models, probes, pumps, or lighting may have basic electrical needs, nevertheless they are not often similar. Therefore, one’s tidy venture finally ends up getting to manage, as an example, a pump that’s managed with five V lively substantial logic, a sensor that outputs five V energetic lower, lights that assume to become switched with 24 VDC, plus a fan that requires a relay right now. But that may modify in the upcoming.
Which is particularly what led [Lukas F?ssler] to style and design and construct the Universal Interface, a board intended to generally be a form of universal translator and interface for all these gadgets. The idea would be to have just one Common Interface board for each external product. For each board, a wide range of enter mixtures controls a single output. The boards are “hardware programmable” inside the sense that jumpers (zero-ohm resistors) are used to spell out in black and white specifically what mixtures of inputs cause which output point out. In this way, some standardization and clarity of manage might be enforced although still currently being adaptable sufficient to support changes.
Try the newest complex programmable logic device from Heisener. As we treasure our customer, we ensure high-efficiency, reliable and completely safe products.
Just about every Common Interface board has 3 inputs and an permit line, every single with their own indicator LED visually confirming its point out. The inputs are 24 V tolerant and each could be configured with a pull-up, a pull-down, and being an active superior or active low. There’s just one output, but it requires a number of kinds: a sturdy relay, a robust open-collector output, a five V logic output, and a 24 V logic output. Configuring which output point out corresponds to what blend of inputs is about by jumpers, and so the board may be very a lot WYSIWYG.
at the moment employing four of such gadgets along with his CNC mill task, all in various configurations, and they’re operating reliably. Interested?