In the process of winding the Enameled Wire(XINYU) into a coil and a ruled wire, the enameled wire and the jig and the enameled wire are rubbed against each other and subjected to stresses such as bending, stretching or contraction. Therefore, the paint film of the enameled wire is required to have good abrasion resistance, scratch resistance and good adhesion on the conductor. In order to facilitate the manufacturing process, the enameled wire is required to have good flexibility, elasticity and bending properties, so that the coil is not easily deformed after molding; the modern high-speed automatic winding machine also requires the outer surface of the enameled wire to be lubricated and the friction coefficient is small, and the enameled wire for special use is requested to be more Large coefficient of friction. When the motor is running, the winding is subjected to shock, vibration, centripetal force and stress generated during heat shrinkage and overload, and the enameled wire must have a certain tensile strength. Click Enameled Copper Clad Aluminum Wire to learn about more information.