In recent years, China's plastic mould parts have formed a huge industrial chain driven by high-tech drive and application requirements of pillar industries. From the upstream raw and auxiliary materials industry and processing and testing equipment to the downstream machinery, automobiles, motorcycles, household appliances, electronic communications, building materials and other major application industries, plastic mould parts have developed a vitality. At present, the application of plastic products is increasingly widespread, which provides a broad market for Plastic Mould Factory and also puts forward higher requirements for moulds. Large-scale, high-precision, multi-functional composite moulds will be favored. At the same time, there is a great demand for plastics in construction, home appliances, automobiles and other industries. The regional characteristics of China's mould industry are obvious, mainly manifested in the following aspects: the development of southeast coastal areas is faster than that of central and western regions, and the development of the south is faster than that of the north. The areas where mould production is most concentrated are the Pearl River Delta and the Yangtze River Delta, accounting for more than 2/3 of the national mould output value. It is understood that in recent years, China's plastic mould parts have developed quite rapidly. At present, the proportion of plastic mould parts in the whole mould industry is about 30%. With the rapid development of automobiles, household appliances, electronic communications and various building materials in China, it is expected that in the future mould market, the proportion of plastic mould parts in the total mould volume will still gradually increase, and the development speed will be faster than that of other moulds. Take the automobile industry as an example. With the rapid growth of automobile production and sales, the potential market for car parts moulds is very large. In the production of automobiles, all kinds of functional parts need to be moulded by moulds. It takes only about 200 pieces of interior trim moulds to manufacture an ordinary car, while the large and medium-sized plastic mould accessories required for manufacturing bumpers, instrument panels, oil tanks, steering wheels and the like are currently only about 50% satisfied from the production capacity of the mould industry. In the field of construction, it is also the general trend for plastic building materials to replace traditional materials in large quantities. It is estimated that the penetration rate of plastic doors and windows and plastic pipes in the country will reach 30% ~ 50% in 2010, and the market share of plastic drainage pipes will exceed 50%, which will greatly increase the demand for moulds. It should be said that the application potential of plastic mould parts cannot be underestimated. Experts predict that large, precise and reasonably designed injection moulds will be widely welcomed by the market. Logistics Mould is also our hot product, you can click to view.
