The Dustbin Mould(FURNITUREMOULD) is a tool for producing plastic products; it is also a tool for giving the plastic product a complete structure and precise dimensions. Injection moulding is a processing method used in mass production of complex parts of certain shapes. Specifically, the plastic melted by the heat is injected into the cavity by the high pressure of the injection moulding machine, and after cooling and solidifying, the moulded article is obtained. So how do the dustbin mould be maintained? 1. First, each dustbin mould should be equipped with a resume card, detailing and counting its use, care (lubrication, cleaning, rust prevention) and damage, according to which components and components can be damaged and the degree of wear and tear is Provide information and materials for discovering and solving problems, as well as the moulding process parameters of the dustbin mould and the materials used in the product, so as to shorten the test time of the dustbin mould and improve the production efficiency. 2. The various properties of the dustbin mould should be tested under the normal operation of the injection moulding machine and the mould, and the size of the final moulded plastic part should be measured. Through this information, the existing state of the dustbin mould can be determined, and the cavity can be found. Damage to the core, cooling system, and parting surface, etc., according to the information provided by the plastic parts, the damage state of the dustbin mould and maintenance measures can be judged. 3. It is necessary to carry out key tracking and inspection on several important parts of the dustbin mould: the function of the ejection and guiding parts is to ensure the opening and closing movement of the garbage box and the ejection of the plastic parts. If any part is stuck due to damage, it will result in Discontinuation, so always keep the mould thimble and guide column lubrication (to choose the most suitable lubricant), and regularly check the thimble, guide column, etc. for deformation and surface damage, once found, should be replaced in time; after a production cycle To apply professional anti-rust oil to the working surface, movement and guiding parts of the mould, special attention should be paid to the protection of the elastic strength of the bearing parts with gears, rack and die and the spring mould to ensure that it is always in the best working condition. . 4. After the dustbin mould has completed the production task, the residual injection moulding should be carefully removed according to different injection moulding methods. The residual injection moulding and other deposits in the mould can be removed by copper rod, copper wire and professional mould cleaning agent, and then air-dried. Disable the cleaning of hard objects such as wire and steel bars to avoid scratching the surface. If there is rust caused by corrosive injection moulding, use a grinder to grind and polish, spray professional anti-rust oil, and then store the mould in a dry, cool, dust-free place. Click Crate Mould to learn about more information.
