The design and production of Chair Mould(FURNITUREMOULD) are mainly used in the production of injection moulding machines. The selection of injection moulding machines is also crucial. Fully automatic injection moulding machines have strong circulation capacity and are suitable for hot runner systems. The following factors need to be considered when selecting injection moulding machines: 1. Depreciation of chair mould to promote the continuous operation of the injection moulding machine, and multi-stage startup to reduce deterioration. 2. The measurement of the injection volume of the injection moulding machine should consider the large volume flow compression of plastic. 3. Due to the increase of hot runner and more splitter plates in the chair mould, the thickness of the mould increases accordingly. The installation height of the injection moulding machine should be paid attention to. Many devices for ensuring the automatic operation of the chair mould are preferably robots or simply controllable manipulators, such as: 1. Reduce the time on the chair mould and the connection time of the cooling water pipe, the gas circuit, the circuit and the hot runner temperature control box 2. Prolapse plastic parts or accelerate their ejection. 3. Control the movement of plastic parts to reduce the starting attachment time. 4. Start the heating of the front mould of the injection moulding machine. 5. The product needs to place inserts, labels or wafers until it is formed. Click Table Mould to learn about more information.
