Although the Daily Necessities Mould(FURNITUREMOULD) design is performed under the expected process conditions when selecting moulding materials and moulding equipment, people's understanding is often imperfect. Therefore, after the daily necessities mould processing is completed, a mould test must be performed to observe the moulded parts. What is the quality? Always find that after making the wrong changes. Plastic parts have many types of defects and the reasons are complex. There are daily necessities for mould reasons and process conditions, and the two are often together. Before repairing the daily necessities mould, it should be carefully analyzed according to the actual situation of the defects of the plastic parts. After finding out the cause of the defects of the plastic parts, a remedy should be proposed. Since the moulding conditions are easily changed, it is usual to first change the moulding conditions, and when the moulding conditions cannot be solved, it is considered that the daily necessities mould is repaired. It is more cautious to repair daily necessities, and it is not easy to act rashly. The reason is that once the daily necessities mould conditions change, it is impossible to make major modifications and restore the original state. Regardless of whether the performance of the part is good, the only way to improve the manufacturing quality of the daily necessities mould. After the daily necessities mould has been tested, if it is not used for a period of time, thoroughly wipe off the daily necessities of the mould residue, dust, oil, etc., apply butter or other anti-rust oil or rust inhibitor, and store it in the storage place. Click Household Product Mould to learn about more information.
