Mould phenomenon is easy to see, which not only affects the appearance of Daily Necessities Mould(FURNITUREMOULD), but also directly affects the overall quality of daily necessities mould, so the rust of daily necessities mould is a problem that cannot be ignored. The following are the reasons and measures for analysis. . Correlation analysis of mould rust: 1. The product (gas, residue) of the material formed is the most common corrosion of the mould of daily necessities mould. In order to prevent the rust of the daily necessities mould, the most widely used is the chrome treatment of the cavity, but the chrome treatment does not adequately solve the problem, because the product part of the sales hole is also corroded. These are places that cannot be plated. 2. When the daily necessities mould cools below the moisture return point, the moisture on the surface of the mould will generate moisture in the air and will rust. Solve the problem of mould rust: 1. Short-term: Gently wipe the surface of the cavity with a cloth. The moulding material is completely dry, reducing the temperature of the material to prevent decomposition of the material. When the moulding is temporarily stopped, spray the rust inhibitor on the cavity and then close the daily necessities mould. 2. Long-term: The material of the product is transformed into a material that destroys the mould of the daily necessities mould without corroding the mould. Materials that are easily decomposed include PVC, POM, EVA, PC and foamed materials. Since the decomposition product has a corrosive effect on the mould, the plastic material should not be changed, and the daily necessities mould should be chrome-plated. When the mould is stopped for a long time, apply a layer of butter on the outside and the moving part of the mould. Click Household Product Mould to learn about more information.