The top load strength of the PET bottles is one of the most important aspects that contributes to its quality and strength.LeakageMost of the products that are packaged in the PET bottles are liquids hence can be easily leaked or spilled if the bottles are not completely leakage free.Presto offers a wide range of PET bottle testing instruments including bottle burst tester, hot wire bottle cutter, secure seal tester and much more that are being used in different industries for better quality assurance of the bottles delivered to the clients. The Top Load Test helps the manufacturers in ensuring that the bottles are strong enough to bear such heavy loads during storage and stacking during transportation. The manufacturers should check the burst strength of the PET bottles with proper methods so that best strength of the bottles could be ensured. With the help of these instruments provide useful insights about the quality of the products and helps in making essential improvement in them.For best quality assurance of the Polyethylene Terephthalate bottles, it is essential to test the properties of these bottles with the help of proper Pet bottle testing instruments. The products that are packaged in the PET bottles need extra safety hence it is essential to make sure that the bottles that are used for packaging are best in quality from every aspect. The weight of the sections should be in right proportion to ensure that the bottles are perfectly balanced. For this, several methods are used, and the most common are the section weight analysis in which the bottles are cut into three sections and then weighed for analyzing the weight proportion of different sections. This load may cause deformation of the bottles. One of the major uses of the PET is the PET bottles that are used for packaging of water, soft drinks, chemicals and many other things. Here are some properties of PET bottles that must be tested to ensure the best quality of products delivered to the clients.Perfect BalancingThe balancing of the bottles must be perfect so Wholesale Moulds Manufacturers that they do not trip over again and again. The use of the PET bottles is so prominent all over the world because of its outstanding properties such as its strength, water absorption and so forth. The seal of the bottles must be checked through the instruments like secure seal tester. The Top load is the load that is levied on a pet bottle when it is arranged in a stack formation, and the weight of the upper bottles exerts pressure on the lower bottles.Bottle Burst StrengthWhen the PET bottles are filled with liquids, they are subjected to very high amounts of pressure, and if the strength of the bottles is low, then it may lead to bursting of the bottles.Polyethylene Terephthalate or PET is one of the most produced polymers and is widely used for different purposes.