How to maintain e-cigarettes, instructions for using e-cigarettes: After e-cigarette hosts have undergone development stages such as voltage regulation, temperature control, and ultra-high power, the technology of e-cigarette host boards has gradually matured. At present, most mainstream e-cigarette hosts, both single-cell and multi-battery devices, have very strong and stable output capabilities. Although the device has maintained a relatively uniform level, but learning a few tricks can still keep the host in its best state at any time.Replace the battery in the main unit in time, and do not wait for the prompt of weak power before replacing.It seems that every user knows what to replace the battery in time, but it is not. Due to the sufficient series voltage of the dual battery device, the frequency of battery replacement will be slower. However, for a single battery host, continuous high power output will quickly consume battery power. The single battery after power consumption cannot reach the high power output capability set by the device, which will directly affect the user experience Pay attention to clean the condensate or smoke near the host interface.It is inevitable that there will be condensation or leakage of condensate during the use of the atomizer. Even if these liquids are handled, the damage of the host can be effectively avoided. If not handled in time, the condensate will corrode the screws and other metal parts on the top of the host. Even for some hosts that do not have electrode leakage protection, the liquid may flow into the host and cause greater damage to the host.Regularly wipe the battery contacts and battery positive and negative electrodes inside the host.Although most of the battery contacts inside the main unit are gold-plated or silver-plated, they still cannot be oxidized. Wipe the battery contacts regularly, and clean the positive and negative electric carbon of the battery to ensure the normal current output of the battery and ensure that the host can maintain the best output state at any time.How to maintain the electronic cigarette: the electrode of the host needs to be cleaned frequently, and pay attention to maintenance.In fact, the electrode interface part is the most prone to problems with the host. Cleaning the oxide of the electrode part during daily use can ensure the smooth connection between the host and the atomizer. At the same time, if the host is not used for a long time, it is recommended to remove the atomizer. In particular, the oil-dropping atomizer with a longer positive screw should be removed in time to reduce the pressure of the atomizer on the host electrode.It is recommended to remove the cartridge when not in use, store the rod and cartridge separately, and do not assemble. And check if there is any condensate at the contact area of the smoke bomb, and wipe it off in time. The three most common problems and solutions in the use of small cigarettesNo matter what type of electronic cigarette equipment, it is very important to maintain regular maintenance. For the host, regular maintenance can ensure that the equipment will not be damaged and extend the service life. At the same time, it can also ensure the output capacity of the host, maintain the strongest output performance at any time, provide continuous power to the atomizer, and allow users to get the best experience.
