Plastic Machinery in India:India is known to be one of the fastest growing economies and it doesn't lack back in the plastic recycling department also. Apart from the material, many technical hurdles are also faced and need to get over with during recycling of plastic machinery.Distributed Recycling:Recently technical devices called recycle bots are used for recycling of some plastic waste. Another barrier to recycling is the widespread use of dyes, fillers, and other additives.Also if different types of plastics are melted together, they will separate just like water and oil and for separate layers. Hence, all kinds of plastic is recycled here.There are many plastic recycling machines plants in India.. Hence the total energy required for mixing it is very large owing to the product side stoichiometry. Hence, heating alone will not help to dissolve such a large molecule. Thus, we can conclude that plastic machinery recycling can be done win limited applications only.Other processes:A new process has also been developed which involves different types of plastic can being used as a carbon source in the recycling of scrap steel. These enable a form of distributed recycling.To your knowledge, a macro molecule usually interacts with its surrounding environment over its complete length. It involves the conversion of assorted polymers into petroleum by a much less precise thermal depolymerisation processHeat compressionIn the heat compression process, all the unsorted plastic, plastic recycling from soft plastic bags to hard industrial waste, cleaned plastic in all forms, etc. Few of the renowned ones to mention are the Plastic to Oil Plant of Fab India, Wall Mounted Brass bathroom Hook factory Ahmedabad, Plastic Recycling Plant of Archana Extrusion Machinery Manufacturing Ahmedabad, and Plastic Recycling Plant of Ylemparto New Delhi., are mixed in tumblers which are nothing but large rotating drums. Therefore, it is essential that plastics used for recycling must have a nearly same identical composition in order to mix efficiently. This will further weaken the structure of the resulting material.It is usually used to make filament of 3-D printer in rural areas. This is because unlike lucrative recycling of materials like metal and glass, recycling of plastic polymers is tough and challenging due to the low density and low value of plastic polymers.There are many recycling processes that are used to recycle used machineries.Challenges in Recycling:Recycling of plastic machinery is not an easy job.Almost all kind of plastic machineries can be remoulded be it an auxiliary machinery, used plastic blow machinery, used plastic moulding injection machinery, used plastic printing and lamination machinery, used plastic processing machinery etc. All of these can be recycled and re-built and re-used
