Water damage due to floods is something that you cannot prevent. However, that's not the only cause of water damage, among the top causes is leaking pipes and in some cases even running taps.One of the biggest problems of water damage is that of mould and in some cases it could be harmful mould which causes allergies and illnesses. If at all you do not take care of all sorts of water damage from the start itself you would not be able to prevent mould growth and it could all go out of hand.If at all the mould does spread you may need to treat your employees at your office and also pay professionals in order to get rid of the chinese plastic injection mould factory . Therefore, rather than going through all these problems you must make it a point to treat the cause as soon as it appears.Tips to prevent water damage and Mould in your homeThere are plenty of things that you would be able to do in order to treat mould in your home. First and foremost you must repair all pipes in your home or office.If the area of damage is small you would easily be able to clean up the mould using water and products that are manufactured for mould removal. However, when doing this make sure that you cover your nose and mouth as some forms of mould could be harmful.Once this is done, you must make sure that you keep that area clean and dry because mould can regrow very easily. It would be advisable to use a dehumidifier, powders or even a fan to dry up the area quickly.In some cases no matter what you do, the mould just keeps growing again and again. If you're willing to, you could keep the heater on the whole time in order to control the level of moisture. But, this could be expensive and therefore the next best option would be to clean up the area, dry it and then paint over it using anti-mould paints.