3.Posted by yihedaautomation on July 8th, 2019Conveyors are used for product conveying. In order to avoid moving in the work, there should be a one-meter channel between the machine and the machine, and between the machine and the wall when there are several conveyors working in parallel.The belt conveyor should start at no load. Conveying equipment is widely used in industries, such as automobiles, household appliances and so on.The assistant manipulator balances the gravity of the object through the thrust or pull force generated by the cylinder to achieve the assistant effect.8. The automated feeding manipulator of NC lathe is usually used as an additional device of machine tools or other machines, such as loading and unloading and transferring work pieces on NC lathe.Before using the conveyor, it is necessary to check whether the running parts, belt buckles and carrying devices are normal and whether the protective equipment is complete.There are also food industries, such as biscuits, bread and so on. First, what are the daily maintenance of belt conveyor? From feeding, clamping to blanking, it is totally completed by robots, which reduces the intermediate links and greatly improves the quality of parts, especially the work piece surface is more beautiful. There are a large number of different types of conveyors designed to convey different types of products or perform specific tasks.4.Flexible conveyor is a device designed to transport raw materials, semi-finished products or products in order to improve the efficiency of processing or production. The products can be conveyed from one place to another.The fixed conveyor should be installed on a fixed basis according to the prescribed installation method.No feeding before driving. After normal operation, the material can be fed.In addition, there will be special belts for different materials; for example, the belt with bucket slope can be close to 90 degrees, and the gradient of pattern belt can also be relatively large.Four, operation rules of the belt conveyor1. Basic knowledge of the belt conveyor The basic knowledge of the belt conveyor is mainly divided into: daily maintenance knowledge, conveyor limitations and conveyor operation rules. Except that the fixed production and processing rhythm can not be improved, automated feeding and unloading replaces manual operation, so that the rhythm can be well controlled, avoiding the impact of human factors on production rhythm, greatly improving production efficiency.. When the belt slips, it is strictly prohibited to pull the belt by hand to avoid accidents. When the tape runs off during operation, stop and adjust it, so as not to use it reluctantly, in order to avoid wearing edges and increasing load.(1)High production efficiency: To improve production efficiency, we must control the production rhythm.2.The functions of feeding mechanism of CNC lathe The functions of feeding mechanism of CNC lathe: The automated feeding manipulator of NC lathe can imitate some movement functions of the human hand and arm, and is used to grasp and carry objects or operating tools according to fixed procedures.
