Stuffed animal dressing technique. Filling cotton detail adjustment method:The filling is also a common skill in making it difficult to make. The fabric itself cannot be three-dimensional, and only when it is filled with certain materials can it become three-dimensional. Fillers are also varied and are generally granular or cotton-like. The filling is different depending on the actual use of the toy. The overall requirement for filling cotton is that the image is full and soft to the touch. After finishing the cotton, the finished product must reach the required weight, and the insufficient filling or uneven parts are unqualified.Toys cannot be left in all corners of the toy. The hard-to-fill part can be used to fill the cotton in place with a pick and hand. The filling should not be too much, and the toy cannot be deformed. The size of the filled toy must be the same as the contract, which is the focus of the cotton filling.2, face and limb type adjustment method:Le type, Le type is also called needle type for mouth type, hand, foot type and so on. Commonly used type methods are fabric V-shaped needles and U-shaped needles.V-type needle method: requires the finished needle, the symmetry depth of the depression is consistent, the type is not wrinkled, the line is not loose, and the line is hidden.U-shaped needle method: the needle should be symmetrical, the depth of the depression is the same, the stitch is not exposed, and the shape is full. Therefore, the needle to be needed should be filled in place before the needle is inserted.Climbing line, climbing line: requires full shape, uniformity, and uniformity.Sometimes you can first sew the foot line and then pull the needle through the tail of the stitch after the sewing. Advantages: high efficiency and time-saving. Disadvantages: The effect is not obvious.Hand needle to make the ball:Handballs are made by hand. A line is sewn along a stop along the edge of the circular sheet. After the thread is drawn, the sheet material is hemispherical, and the cotton is filled into the hemisphere, and cheap high speed embroidery machine then the needle thread is knotted. In the process of tightening the needle thread, the mouth should be scraped into the ball, and the amount of cotton ingested is as standard as the finished ball surface.
