There are many reasons for using pressure washers for coils andcondensers cleaning. The first among them is the unmatched cleaningpower of CX Series Turbo Blowers pressure cleaners. These machines offer an output pressurelevel of up to 8000 psi, which is actually for cold water machines.However, any machine that offers heated output at a pressure level ofup to 3000 psi does an efficient job of cleaning coils and condensers. Another reason for preferring pressure washers for coils andcondensers cleaning is the speed and efficient cleaning of thesemachines. Power washers pump their output on to the hard surfaces andwash away dirt and impure substances stuck on the surfaces. One potential problem associated with using pressure washersfor coils and condensers cleaning is the amount of water transferred tothe surfaces. When cleaned with ordinary pressure washing machines, alot of water gets collected onto the surfaces. Tips to choosing theright machine:Role of heated outputThe most importantspecification associated with a pressure wash system is its outputpressure level. That does not mean that other specifications areinsignificant. You also need to keep the temperature level of the machine inmind, if you are choosing pressure washers for coils and condenserscleaning. The higher the output temperature, the better it is forcleaning coils and condensers.The high output temperature of a steam system, for instance,improves the cleaning efficiency by helping to break or weaken the bondbetween dirt and the surface. It also helps to speed up the cleaningprocess.Types of heated machinesThree types of commercialpressure washer machines are available, based on the output temperatureof the machine. These are cold water pressure cleaner systems, hotwater pressure washers, and steam pressure wash machines. Cold watermachines offer output at room temperature, whereas hot water pressurewashers offer an output temperature of up to 210°F. Steam machinesoffer the highest output temperature of up to 330°F. Steam pressure washing equipmentare the best of the lot, in terms of speed and efficiency. Hot watermachines also do a good job of cleaning coils and condensers.TechnologyWhen cleaning coils and condensers,it would be better to make use of commercial pressure washer machinesequipped with automatic shut off technology. Cleaning coils andcondensers involves frequent stopping and starting the machines.Frequent switching off and on the machine is both inconvenient to theworkers and detrimental to the longevity of the machine.Automatic shut off technology makes the on and off processes extremely easy. Industrial pressure washers equipped with this technology automatically shut down, when the there is no flow through the output wand for nearly 30 seconds.The restarting of such industrial pressure washer equipment toois easy. Cleaning workers can switch on the machine by pulling thetrigger of the gun. The technology not only makes the cleaning of coilsand condensers easier, but ensures that the machines last longer too.
