The Fast Sport Electric Motorbike manufacturers introduce the brake classification of electric vehicles:It can be roughly divided into holding brake, lifting brake, drum brake, and disc brake.1. Hold the brake. The braking principle of holding brake is to hold the hub from outside to inside to brake. This brake adopts mechanical transmission because the braking effect of the abnormal sound of the holding brake is not good, it is nearly eliminated at this stage, so I won't say much now! 2. Raise the brake. The braking principle of the rising brake is to break from inside to outside, pull the brake line, and only one side of the brake is quickly spread to achieve the braking effect. The brake effect is good, which is Widely used in electric bicycles, but it is inevitable to use it to a certain extent.3. Drums. The braking principle of drum brake is to open the brake line or brake lever, and the two brakes are simultaneously opened and clung to the brake ring so as to achieve the braking effect! The replacement method of the drum brake is relatively simple! After removing the wheel, it will come down with two hands. When installing, it will be done with two hands folded into 90 degrees and one set up! Similarly, joints should be a little oily, flexible, and rebound freely!4. Disc brake. The braking principle of the disc brake is to use hydraulic oil to push the brake pads to rub stainless steel plates to brake, and the brake fluid of the disc brake needs to be changed for a period of time.The above content is organized and shared by Electric Bike Factory , hoping to help those in need.