Electric vehicles are riding tools that we often use. In order to ensure travel safety, regular inspections are necessary. So for electric bikes, Electric Bike Manufacturer will introduce what needs to be checked regularly?1. TireIf there is a problem with the electric vehicle tires, delaying time is still a trivial matter, and endangering safety is a big problem. Therefore, we also need regular inspections of tires in daily life. The first is to check whether the tire pressure is normal. The operation is very simple, people sit up, if the tire is obviously deflated, it means that the tire is out of gas. If you have a barometric pressure detection device at home, you can use the device to perform a more accurate inspection. If you detect that the air pressure is less than 2.0 atmospheres, you can pump up. Next is to check the degree of wear and aging of the tire. If you find that the depth of the tire pattern is significantly shallow, the tire tread has cracks and other serious wear, or the tire is aging, such as tread hardening, cracks, etc., you need to go to the store to check whether you need to replace the tire.2. Lights and speakersLights and horns are also very important for riding electric vehicles. Headlights are lighting tools for riding at night, and horns are signals to remind pedestrians to avoid and warn. The inspection of lights and horns is very simple: turn on the car lights to see if the lighting is normal; press the horn and listen to whether the sound is loud. Especially when going out at night, these two items must not be forgotten.3. BrakesThe importance of the brakes is self-evident. Checking the brakes can be done as follows: pinch, pinch, loosen, and turn. First, pinch. Hold the handlebars with both hands and apply left and right brakes respectively, and push and pull the electric car forward and backward at the same time. Under normal braking conditions, the wheels will not rotate at this time. The second step, loose one loose. When the handle is released, the brake system in normal operation will be quickly reset. Finally, turn around. Turn the speed control handle to brake after the motor runs. Under normal circumstances, the motor can be immediately powered off.The above content is shared by EEC Electric Bike Factory in the hope of helping those in need.
