Among them, the Automatic Injection syringe barrel machine vertical cleaning machine is suitable for the clean cleaning of oral liquid glass bottles specified by the standard. Under normal circumstances, after a certain number of years of full-load operation of the transducer, the oscillation surface may be perforated.If this happens, you need to put the entire transducer (not including the spray-plastic shell) into an oven and set it at 100°C for 3 hours, or use a hair dryer to remove moisture until the resistance stops normally. In terms of use, the equipment must be used in places where it is kept away from flammable and explosive substances. At present, vertical cleaning machines are widely used in the pharmaceutical and other industries, but users have responded that in the process of use, vertical cleaning machines have some failures. It may cause fire and personal injury; electrical control box and related electrical components, etc. If this insulation resistance value is not reached, the transducer is usually damp., be careful not to splash into water, and keep away from water vapor, corrosive gas, dust, etc. Generally, the insulation resistance is required to be greater than 5 megohms. It is reported that no liquid or insufficient liquid level in the washing tank will cause irreversible damage to the equipment. The machine can automatically complete the entire production process from bottle feeding, ultrasonic rough washing, bottle outer wall fine washing, bottle inner wall fine washing to bottle out. Fault 4: The transducer vibrator ignites, and the ceramic material is broken. This kind of failure can generally be checked with the naked eye, and usually as an emergency treatment method is to disconnect the individual damaged vibrator to prevent the normal operation of other vibrators from being affected.
