Now let us look at the Infusion Device Assembly of the two parts of the Disposable Syringe Assembly. In the drawing of the component parts, the two different colors that are represented by the yellow and blue lines are drawn against the green background. The top view showing the top view of the assembly and the bottom view showing the bottom view of the assembly will be helpful for understanding the assembly as seen from the bottom. The top view showing the yellow dotted line and the blue dotted line represents the inside of the needle hub. The right hand side shows the tip of the needle and the left hand side show the interior wall of the needle hub.It is always recommended to go through the instructions that come with the syringes before using it with medicines. When these syringes are used for the first time without following the correct instructions,many accidents occur as a result of mishandling or inappropriate use of the medicines. These accidents may cause injury to the users or might cause death. This is why you should always follow all the instructions carefully so that no untoward incident happens when using the disposable syringe assemblies.You would definitely find a wide range of options available when it comes to the color of the disposable syringe assembly. The basic color options are the ones that are made of aluminum and the black color options are the ones made of stainless steel. When you are looking for an assembly machine that is especially made to fill inhalation devices, you should opt for the aluminum color assembly machine.