If water enters the brake fluid, the high temperature generated by friction will vaporize the water during the braking process, and the gas will be compressed in the brake fluid.. Regularly check the brake fluid height Check the brake fluid level regularly every month, pay attention to whether the brake fluid level has dropped significantly, whether the quality has deteriorated, if it is, it should be added or replaced in time. The braking efficiency is Aluminum alloy auto parts Foundry very weak. Once it fails, it will cause an immeasurable major traffic accident. It is best to use a ruler to measure the thinnest part of the brake pads to see if it is within the allowable range. Therefore, car owners should pay attention to the daily maintenance and troubleshooting methods of the brake system.0mm, it needs to be replaced. The following editor of Laojin Machinery will introduce the precautions for inspection and maintenance of Yantai automobile brake drum system: The brake system is very important to the driver's life safety. If it reaches a certain level, it must be replaced in time. On the one hand, the braking function of the brake system is restored, and on the other hand, the mud and sand brought in by the rain are blown away to reduce their damage to the brake system. Therefore, when the brakes are wet, the car owner should go to the 4S shop for drying treatment. Keep the brake system dryBrake fluid has very strong water absorption. Inspection of brake pad wear Pay attention to the degree of wear when checking the brake pads. 3. .5mm, and the difference between the two sides of the brake pad on the floating brake caliper reaches 3. If air enters due to insufficient amount of brake fluid, braking will become insensitive. Generally, if the thickness difference between the two sides of the brake pad on the fixed brake caliper reaches 1
