It has a comprehensive advantage that other coatings can’t compete. Teflon spray has excellent heat resistance and low temperature resistance. It can work at freezing temperature without embrittlement and does not melt at high temperature. A small amount of dirt can be removed by simply wiping. (In addition, there are special coatings, which can make the coating conductive). After Teflon spraying, the unique insulation and anti-static properties are widely used in the electronics industry. Teflon spray ETFE: ETFE is a PTFE coated tape Manufacturers copolymer of ethylene and tetrafluoroethylene. The resin is a tough fluoropolymer that can form a highly durable coating with excellent chemical resistance and can be used in Work continuously at 150°C. It has excellent chemical stability, excellent non-stick characteristics, and high operating temperature. The advantage of PFA is that it has a higher continuous use temperature of 260°C, stronger stiffness and toughness, and is especially suitable for anti-sticking and chemical resistance applications under high temperature conditions. Its application flexibility makes it Can be applied to almost all shapes and sizes of products. Because of the pronunciation, it is usually called Teflon, Teflon, Teflon, Teflon spray, etc. Teflon sprayed FEP: FEP (fluorinated ethylene propylene copolymer) non-stick coating melts and flows to form a non-porous film during baking.kytfl.Teflon spray high-performance special coating is a fluorine coating based on polytetrafluoroethylene resin, the English name is Tefion.html Teflon coating, Teflon coating,. Teflon spray coating is a rare high-performance coating that combines heat resistance, chemical inertness and excellent insulation stability and friction. Under a certain load, it has the dual advantages of wear resistance and non-sticking. Short downtime, saving working hours and improving work efficiency [Teflon wear resistance] It has excellent wear resistance under high load. Teflon sprayed PTFE: PTFE (polytetrafluoroethylene) non-stick coating can be used continuously at 260°C, with a high operating temperature of 290-300°C, extremely low friction coefficient, good wear resistance and excellent chemistry stability. Teflon sprayed PFA: PFA (perfluoroalkyl compound) non-stick coating melts and flows during baking to form a non-porous film like FEP. It has remarkable thermal stability. It does not stick to water or oil, and it is not easy to stick to solutions such as sticky during production operations. 2. Flon wear-resistant applications \u0026mdash; gears have self-lubrication and wear resistance after mechanical treatment, Teflon wear-resistant applications \u0026mdash; mechanical small parts have self-lubrication and wear resistance after treatment Teflon wear-resistant Damage application \u0026mdash; After the inner wall of the bearing is treated, it has self-lubricating and wear resistance 【Corrosion resistance application】 [Resistant to high and low temperature applications] Teflon is hardly corroded by chemicals and can protect parts from any kind of chemical corrosion. [Electrical insulation application] After being coated with Teflon special industrial coating, it has good insulation and high resistivity on the surface, which can play an anti-static effect. [Anti-adhesive application] Almost all materials do not adhere to Teflon spraying, and a very thin film also shows good non-adhesive performance. It can withstand high temperature to 300°C in a short time, and generally can be used continuously between 240°C and 260°C. (all are the transliteration of Teflon).
