Below we will introduce the hot and cold cylinders in detail. Upper and lower cone, upper and lower head.The hot and cold cylinder (also known as the aging cylinder) has the advantages of energy saving, noise reduction, corrosion resistance, strong production capacity, and convenient cleaning. They are especially suitable for pasteurization and heat preservation of milk. According to the material in and out, they can be divided into: open hot and cold cylinders, and closed hot and cold cylinders. It is widely used in the dairy industry, food, pharmaceutical, chemical, beverage and other industrial sectors as heating, Stainless steel tanks are necessary for cooling, heat preservation, sterilization treatment or storage of slurry. According to the heating medium, it can be divided into: natural gas hot and cold cylinders, steam hot and cold cylinders, and electric heating hot and cold cylinders. The hot and cold cylinders are divided into different types. They are essential equipment in the ice cream production line The purpose of emulsification. The emulsification tank is a device that dissolves one or more materials (solid phase, liquid phase or colloid) in another liquid phase and hydrates it into a relatively stable and stable emulsion. The huge rotating suction force generated by the centrifugal high-speed emulsifying head rotates and sucks the material directly above the rotor, and then throws it towards the stator at high speed.At the same time, the anti-vortex plate at the bottom of the tank converts the rotational force into up and down tumbling force, so that the material in the tank is evenly mixed and prevents the powder from accumulating on the liquid surface. After passing through the stator tooth gap, the material is collected to the outlet and ejected. Below we introduce the working principle of the emulsification tank.The emulsification tank is suitable for the production of industrial products such as cosmetics, medicine, food, chemistry, dyeing, printing inks, etc. It is especially effective for emulsifying materials with high matrix viscosity and high solid content. The material is hydrated by shearing, collision, and crushing between the rotor and stator. The entire process is carried out under vacuum conditions to prevent the material from generating bubbles after high-speed stirring, and can meet the requirements of sanitation and sterility. Adopt vacuum suction, especially for powder materials to avoid dust flying.The function of the emulsification tank is to dissolve one or more materials (water-soluble solid phase, liquid phase or jelly, etc. The emulsification tank adopts a coaxial three-heavy agitator, hydraulic lifting and opening the lid, the speed of the fast homogenizing agitator: 0-3000r/min (frequency conversion speed regulation), and the slow scraping agitator automatically adheres to the bottom and wall of the tank. This system is equipped with a CIP cleaning system, the contact part of the container and the material is made of SUS316L material, and the inner surface is mirror polished (sanitary level).) in another liquid phase and Wholesale polymethacrylimide Manufacturers hydrate it into a relatively stable emulsion. Emulsification tanks are widely used in the emulsification and mixing of edible oils, powders, sugars and other raw and auxiliary materials. Emulsification tanks are also used for emulsification and dispersion of certain coatings and paints.