There is lot of reasons for a tooth break. If a fall is severe then it will cause a fracture in the tooth. Too much of tooth decay Range Hood Motors Manufacturers can also make the tooth split. In both the cases there is not enough tooth mass to give support to the porcelain top. Tooth pulling is normally avoided in many cases. The dentists or cosmetic dentists construct a post and core to protect the tooth. The metal post and the core will work as a support for the tooth which is surrounded by a cosmetic dentist filling. This particular material is called the core which gets hardened between the tooth and the post. This fills up the cavity created and makes chewing reliable. The filling material depends on the post and the core which is put a filling into the tooth cavity. So a root canal surgery is necessary before all this procedure. A core lab is the place where all this treatments are given. In the core lad the cosmetic dentist will normally recommend for such a type of treatment only when more than half of the tooth's crown is damaged. The metal post is made up of stainless steel titanium which is biofriendly; some are manufactured by from metal which is free from carbon fiber. Before getting into the post and core treatment, the dentist performs a root canal surgery which eliminates the source of the infection in the tooth. There will be enough place now to put the metal post. The dentist uses his dental file to make a proper place for posting the post in the proper place. After placing the post the core i.e., the filling material is put between the post and the core. This material takes the shape of the space in the tooth. The Core lab will help in putting the post in right place and creating a new chewing area in the tooth. When the filling material is hardened the dentist will take the impression of the tooth. These impressions help the lab people to create a crown to fit on the tooth. Before getting a permanent crown the patient is provided with a temporary crown to protect the post and the core.