Bed Bug Control - How to Get Rid of Bed Bugs Reduce Clutter: Remove all personal items (stuffed animals, soft toys, blankets, electronics, etc) and anything that does not stay in the room permanently. Caution: Be mindful that items from the infested area can transfer bed bugs to other areas. It is best to bag them in plastic bag. Launder Infested Garments and Linens: Infested garments and bed linen cannot be treated with insecticide. They need to be laundered in hot water (120 degrees fahrenheit minimum). If washing is not available, heating the garments or bed linens for several minutes in a clothes dryer may work. Dismantle Bed Frames: Dismantling bed frames in infested areas typically exposes bed bug hiding sites. Having access to these areas during cleaning is important. Stand up the box spring and shine a flashlight through the gauze fabric and look for bed bugs. If the fabric is torn (possible hiding place), remove fabric to prepare for spraying. If the mattress and or box springs are infested, you may want to consider . Once covered with these encasements, bed bugs can not enter or exit. There is no need to treat the mattress or box spring when using these encasements. Keep them on for a year. Remove Dresser Drawers: Remove drawers from desks and dressers since bed bugs like to hide in these areas. Turn furniture over to inspect and clean all hiding spots. All furniture should be pulled away from the walls. Clean the Area Scrub infested surfaces with a stiff brush to dislodge eggs. Vacuum the room extensively. Use a vacuum hose attachment to thoroughly vacuum cracks and crevices on furniture and along baseboards on the walls. Vacuum along baseboards, furniture, bed stands, rails, headboards, foot boards, bed seams, tufts, buttons, edges of the bedding, as well as the edges of the carpets (particularly along the tack strips). A good vacuum cleaning job may remove particles from cracks and crevices to encourage greater insecticide penetration. Bed bugs cling tightly to surfaces, so it is best to vacuum by scraping the end of the vacuum attachment over the infested areas to pull out the bed bugs. Caution: It is not good to use a bristle attachment, because you may transfer bed bugs to other areas since they cling to the brush. Dispose of vacuum cleaner bags after you are finished in an outdoor trashcan. Caulk and Seal Caulk and seal all holes where pipes and wires penetrate walls and floor, and fill cracks around baseboards and molding to further reduce harboring areas. Click Here http://chinchex.com
