The new inventions made in Plastic industry are not only simplifying our conflicts but promising for the better future well. The great effort and hard dedication of researchers would definitely come up with some fruitful results, once their attempt to convert plastic into liquid fluid is reached success.The two forms of plastic that can be molded are thermosets and thermoplastics. There is a huge difference in these two different forms. The thermoplastics can be melted at the very high temperatures. But, the exception with thermosets is totally opposite. It will get converted into more harden form at the high temperature. This difference is only because of their plastic polymer which forms those two forms. Thermoplastic is made up of the polymers which look like the chain of atoms in one dimensional cord. As we discussed, it can be melted at the high temperature, therefore it is easy to reshape it.We can create as much as possible new shapes. On the other hand, thermosets are made up of the polymer which is the three dimensional chain. They are able to keep their form as it is. We can say that a number of processes are involved in giving new shapes by molding. These two different types can be used in varying processes. The combination of these two Plastic Kitchen Storages Factory processes is known as blowing molding. Apart from this, there are lots of other processes of molding like extrusion, and injection modeling etc.Extrusion Process This process involves the raw materials like powder, pellets and beads etc. initially the plastic would be flowed into the revolving chamber. This chamber is known as extruder as well. What it will do is melt the plastic polymer. Afterwards, the melted form can be used to create the new shapes. The large numbers of products in the new shape are formed by this method. The finished product needs cooling, so it is dropped into the conveyor belt, to get cool down with water. At last the finishing touch can be given according to wants. Most of the products that are made through this process are pipes, sheets and films.Injection molding process Extrusion was one and injection molding is the another process of plastic polymer molding. The basic principle behind the technique is same as extrusion. A hopper is used to feed the raw plastic into melting chamber. The only difference comes when melted plastic is put into cold mold with very high pressure on it. The new product will be clean and if the mold is cold. Some of the common products that are made with this process are butter containers, caps of bottles, and toys to play.So, these were some of the processes used for molding that make the reuse possible.