Industrial systems use a wide range of valves and tube fittings. These components are carefully selected to ensure compatibility, performance and safety. Whether you’re working with a pneumatic or a hydraulic system, you must be equipped to differentiate between different valves and fittings. It can be hard to distinguish between threaded and pp compression fitting. It may be even more difficult to understand if the pp compression fitting will match your system. However, having basic knowledge about pp compression fitting can save you from trouble. Here’s what you should know to make the right decision. What makes the pp compression fitting different? Both threaded and pp compression fitting make use of threads for improved connections. The difference lies in how each of them uses the threads to perform. Threaded fittings have a single piece connection end. The threads are tapered and used to seal the connection. In contrast, pp compression fitting don’t use threads for sealing. The latter have a three-piece connection that is responsible for creating the seal. Seal is created with a ferrule and a compression nut. Threads are only responsible to hold the body together with the nut. How do they work? Using pp compression fitting, the seal is created by application of force. Their three component assembly comprises a compression nut, an inner ring or ferrule and a connector. If the nut is properly tightened, the ferrule presses against the tube. The force exerted for this action is enough to remove excess space that may be present in the joint. This prevents the transferring fluid or gas from leaking. As mentioned above, it is the ferrule that creates the seal, not the thread or connection. Are they a good choice? For most systems, yes. Compression fittings provide a good enough seal, without requiring a soldered or welded connection. Furthermore, you don’t need any special tools or skill to install these fittings. You can easily disassemble the fitting for maintenance in an area. The joints can be easily broken and reassembled without risking damage. However, don’t over-tighten the fitting when assembling it. It can damage the ferrule or the tube. Stop tightening it if the nut no longer turns with reasonable force. Since they don’t require welding or soldering, compression fittings are a good option for high temperature applications or with flammable materials. You can achieve high performance and fast assembly with our flared and non-flared compression fittings.
