Sculpfun S10 vs xTool D1: Which is the Best Laser Engraver?The Sculpfun S10 is Sculpfun's newest and most powerful laser engraver! It's suitable for hobbyists and even skilled workers, and it exhibits comparable industrial-grade wood cutting performance, so it's good enough to run a small business successfully! The xTool D1 is ideal for cutting 10mm planks and 5mm black acrylic in one go, with a smooth cut surface and fewer burn marks. Sculpfun S10 and xTool D1: FeaturesThe xTool D1 is a laser processing machine with extremely high processing accuracy, sufficient processing variety and energy, and an intuitive human-machine interface that can be easily used by anyone. The sculpfun s10 laser engraver is equipped with high-speed air assist nozzles, and when using the same air compressor, the S10's jet air flow is faster. For example, when using a 30L/min, 0.03Mpa air compressor, the S10 nozzle will eject a high-speed airflow of up to 14.5m/s. This will greatly improve cutting penetration and cutting efficiency.Sculpfun S10 vs xTool D1: OpinionIn fact, the two laser engraving machines have similar functions and prices, and they are all metal structures. I personally recommend the S10 more because it has an extendable design, just buy sculpfun s10 expansion to expand the engraving area, and also comes with a free A4 size steel pad to protect the table from laser damage and fire hazards. There is a very safe and prominent power switch on the machine, you can quickly turn off the power directly in an emergency. And S10 can use LaserGRBL, LightBurn software, xTool D1 is suitable for LightBurn and Laserbox Basic. At present, the official website of xTool D1 has been discontinued, but Amazon can still buy it, and the S10 is a new model of Sculpfun. If you are interested in sculpfun S10, you can buy it on the official website of HTPOW, which is a top distributor in China, and the products are safe and reliable. You can also learn about the sculpfun S10 review through this website.