The DIN 41612 Connectors Factory has a quadrangular prismatic shape, and the end shrinks and becomes thinner.. Its structured design takes into account the characteristics of convenient wiring and reliable screw connection. This wiring method saves up to 60% of wiring time, no wire stripping, no tools, only wire breakage, and nothing more. ·No additional investment costs are usually required. Pull the opening aid lever to push the wire into the knife edge and cut off the insulation to achieve air-tight connection. Other commonly used materials include thermoplastic polyester (PBT); and liquid crystal polymer (LCP) used for perforation reflow technology. Only when the standards are met, can you buy with peace of mind and use with peace of mind to avoid hidden dangers of safety accidents . 2. Implementation standards of terminal blocks: Due to the importance of terminal blocks, the design and use of terminal blocks must comply with relevant safety and environmental standards. 6. At the same time, the reliability of the terminal blocks is getting higher and higher.Generally, when the manufacturer of terminal blocks is designing the finalized products, the electromechanical components used in electronic equipment in GB/T 5095-1997 (basic test procedures and measurement methods): UL486E, UL1059. The solder pins are made of copper alloy, and the solder pins are free of dirt to ensure long-term reliability of welding. This greatly improves the adaptability of the product and reduces the cost to a large extent. 5. Reliable connection: front connection, obvious connection, low maintenance, no tightening.