Open face booths are easy to set up, easy to work with and way cheaper in respect to the closed one. But, this type of constructions is prone to fire accidents so before buying your product, you must take a look at the standards of International Fire Code (IFC).Want to set up a spray booth at a small, narrow place? Well, in that case u may try an open face booth. As we all know there are two types of spray booths present \u2013 actually there could be more designs, but apparently two of them are popular. This one we are talking China SSPP Nonwoven Fabric factory about is very much easy to use and has quick set up opportunities.It\u2019s very easy to set up an open face booth at any place. If you have a small work opportunity and can\u2019t spend a lot of money on spray booth option, you may choose this one. The open one is much cheaper in respect with the closed one. The productivity of the open one is also very high. See, if you have a big, giant machine part that you can\u2019t move with out a crane, just bring it near to the open edge and the with the spray bottle you can easily paint it. Isn\u2019t that an easy option?Before buying a simple kitchen instrument we always take a look at the specification charts. We want our product to be the best in the market. Don\u2019t we? So, take a look at the specification charts and look for some important standards that your machine needs to have. Look for the standards of International Fire Code (IFC). IFC standards should be there to protect your machine from fire accidents. Watch out for cutting application NFPA 86 and as you are using a highly inflammable material, you should maintain NFPA 33. These standards sometimes may differ by units, so consult the salesmen or the marketing person of the product for all safety rules. In case of the closed one, the security is in your hand. If any accident happens the person inside the booth will get hurt. But for an open one, any one around the open area may get affected. So, before buying your product you must take necessary security steps, and don\u2019t forget to maintain the IFC rules!Now, if you are going to use a machine and you want it to have a long life span, you must maintain your product regularly. For the open one sometimes it very tuff to clean the back side of the booth, so set up your booth in such a way that there should be hardly any place behind. You may fix the booth with the wall behind. The exhaustion system should be good; there must be fans and motors to do the process smoothly. There should be exhaust stacks in adequate amount and that will make the ventilation and exhaust process easy. These are some important steps to follow before buying your machine.