Just like any other equipment, the best electric longboard skateboard requires regular maintenance for it to fully function as required. This is vital as it increases the performance and lifespan of its parts.Here are some important information about the tips and maintenance of the bestelectric longboard.1. Cleaning To keep your best longboard wheels functioning, it is important to clean it after every ride. When cleaning your best electric longboard, use a slightly damp cloth and clean it carefully to prevent any dirt or water from entering into the electronic components. After cleaning, wipe your board with a dry cloth.2. Bearing It is also very important to regularly maintain your bearings usingspecial maintenance oil. There are some bearing cleaning oils & lubes manufactured specifically for the best longboard wheels. When properly applied, such oils can ensure that the bearing lasts for a long time.Additionally, you should ensure that no water enters into the bearings or wheels of your best electric longboard. This is because water can cause the bearings to be defective and make it call for replacement. If water accidentally enters into your bearings, they develop great damage causing them to produce a scraping noise.3. Maintaining the battery When charging your electric skateboard or any other boosted skateboard you should connect the charger first to the electric skateboard and then plug it to the socket. When the battery is fully charged, unplug the charger from the socket and then from the skateboard. It is important to ensure that you charge your battery at least once in a month if you stay for long without using you longboard wheels.4. Motors and wheels While cleaning the wheels/motors, make sure that no water gets into the engines. It is quite important to prevent water, stones, and sands from entering the engines and replacing the wheels when the profile is less than 5mm thick to ensure full functionality of your electric and boosted skateboards.5. Adjust bolts and screws Regular checks and adjustments of the bolts and screws are very important because of the vibrations released when driving. Use a T-tool to regularly check, adjust and tighten the most important bolts in the trucks and wheels.
