A wet carpet is a huge problem. If you don’t take care of it quickly, it will become worse within a few hours. Even after water extraction, the problem will still be there. Just leaving a wet carpet to dry by itself after flood damage has affected it is one of the biggest mistakes people commit.Cleaning a wet carpet after it received water damage is necessary to prevent mould growth. Otherwise, it may lead to, especially if you or someone you live with suffers from respiratory conditions.Mould irritates and makes your eyes watery and itchy. It also makes your throat sore and will worsen the symptoms of those who suffer from asthma or allergies.Let’s say your carpet was affected by flood damage, for example. In these cases, the best option is to perform an emergency Chinese Commodity molding carpet cleaning. Here we have for you some useful tips to prevent carpet mould after water damage.Spet 1: Water extraction should be done as soon as possible.As mentioned above, you can become easily overwhelmed by trying to prevent carpet mould. However, it is not impossible. The first step is to get rid of the water in the area. This action needs to be done as soon as you notice, there is a problem in your house. Please start by identifying the source of the flood, and try to fix it. Otherwise, trying to get rid of the water will be useless in the end.After you’ve gotten rid of the water, it is time to start drying the carpet. You can use a wet-dry vacuum to help you with this. However, the process is far from over. It would be best if you eliminated the moisture from the carpet, and for this task, you can use a carpet-drying fan. However, please note this process will take you some time, sometimes, even several days.Step 2: Use fans to accelerate the processAgain, a water-damaged area can take many days to be completely dry. However, a fan helps a lot with this task, and they also help with fresh air circulation.Even if you think the carpet is dry after some time, it probably is not. Please leave the fans functioning for at least a week to make sure there isn’t any humidity around.Step 3: Use a dehumidifierAs mentioned above, it is necessary to remove the moisture from the carpet. You can help yourself with a dehumidifier to dry the whole room. Essentially, any tool you think will allow you to dry the rug quickly will help you.Step 4: Go for steam cleaningSteam cleaning your carpet will be useful to get rid of all the germs and bacteria your carpet may have acquired from the water. This process can be done by yourself, but it’s highly recommended to hire a professional.Steam is useful during these processes because high-temperature levels are helpful when it comes to killing toxins, and other microorganisms. Not only will you get rid of potential germs and bacteria, but also will remove the bad odour the wet carpet may have obtained from the water.It is important to remember: your carpet may be saved, but your padding probably will not. Re-carpeting your whole house can be extremely costly. However, if you take care of the problem quickly and have the carpet dry as soon as possible, you will only need to replace the padding.Step 5: Sanitize your walls, baseboards, and check your furnitureIt is important to check if your furniture was damaged by the water, as mould can grow on many surfaces. Clean your walls and other surfaces using soap and water. Then, proceed to sanitize them using chlorine bleach and water.
