The friction coefficient of the reducer is small, there is no relative sliding in the meshing area, the wear is very small, and it is durable. View other products of cycloid reducer manufacturers: gear reducer. Reliable use and long service life: The main parts are hardened with high carbon alloy steel (HRC58-62), then finely ground, and the cycloidal teeth and the needle gear sleeve are meshed and transferred to the needle teeth to form rolling friction. The characteristics of the cycloid reducer:Because there is no rolling friction and The relative sliding of the meshing surfaces, so the primary deceleration efficiency reaches 94%. Mainly used in metallurgy, mining, construction, light industry and other industries. Large reduction ratio and high efficiency: the reduction ratio of the first-speed transmission is 9-87, the reduction ratio of the second-speed transmission is 121-5133, and the multi-speed combination can reach tens of thousands.The X, B cycloidal pin gear reducer is a machine that achieves deceleration by meshing the cycloidal pin gear according to the principle of planetary transmission with less tooth difference. The machine is divided into horizontal, vertical, two-axis and direct connection assembly methods. Stable operation and low noise: different types of Wholesale Parallel Shaft Gearboxes tooth pairs contact at the same time, with large coincidence, strong overload capacity and low vibration