Wait for some time Vibratory Tub Finishing Machine, and allow the treatment to work. Avoid overeating as it can raise your sugar levels high. Wait for about 15 minutes and then test your blood sugar level again using accu-chek glucose testing machine. If it's still too low, then eat another 15 to 20 grams of sugar or carbohydrate. You need to repeat the process until the level of blood sugar level is at 70 mg/dl or higher. Upon reaching this level, eat a nutritious, carbohydrate snack.Seek medical help immediately if you haven't responded to the carbs.Staying prepared to treat low blood sugar levels is important. You should know what to do about hypoglycaemia to ensure immediate treatment. This is an important part of a diabetic plan.Snack vending machines come in all shapes and sizes. Some are small enough to hang on a wall and some are the full size floor models like the one I had. Some are electronic that you plug into an electric wall socket. Some are manually operated that don't require any electricity at all.There are snack vending machines that offer user's the chance to buy a coffee right out of the same machine, while others can vend soda and other cold beverages. There is snack vending machines that do all three! That's right, these machines offer customers the chance to buy coffee, cold beverages and snack products out of the same machine.I've seen a snack vending machine that sells cigarettes.I've seen a snack vending machine that sells hockey cards.I've also seen a snack vending machine that sell bus passes to access the local transit system.And I've even seen a demo where one of my local distributors showed me how he could vend a can of three (3 ) tennis balls out of a snack vending machine! That actually impressed me.So what does this all mean and how do you choose the right kind of snack vending machine?You need to have as much flexibility with your snack machine as possible. I wanted my machines to be able to have maximum flexibility to sell my customers whatever they wanted (within reason and legal parameters) and I needed to have the machine that was capable of doing that.