The forging factory is an enterprise that forges, processes and produces forgings. Before shipment, the produced forgings need to be placed in a certain environment to ensure that the produced forgings are not corroded and worn out, so how do they need to be placed? The requirements for placing forgings in a forging factory are mainly composed of two parts. The first is the choice of environment, and then some requirements for placement. Today, on behalf of Shanxi Yongxinsheng Forging Factory, the editor will introduce to you the requirements and conditions for stacking forgings, hoping to be useful to everyone.Forgings placed in the forging factory1. Environmental site requirements1. The warehouse of the forging factory should be selected according to the geographical conditions. Generally, an ordinary closed warehouse is used, that is, a warehouse with a roof, a wall, tight doors and windows, and a ventilation device.2. When the forging factory keeps the warehouse and site for forgings, the warehouse should be located in a clean and tidy place, in an environment that requires unobstructed drainage, and avoiding harmful gases or dust. Select the site to remove all debris on the site and keep the environment clean.3. The forgings in the warehouse of the forging factory shall not be placed together with materials that are corrosive to forgings such as acid, alkali, salt, etc. Forgings with different attributes should be placed separately to avoid confusion and prevent contact with corrosive substances.4. Forgings can be stored in a well-ventilated factory shed, but things must be padded underneath. If it is good, the tarp should cover it.5. The warehouse for forgings should be ventilated in sunny days and closed to prevent moisture in rainy days, and always maintain a suitable storage environment. Place the forging 2. Placement requirements for forgings1. The principle of placing the forgings in the forging factory is to arrange the forgings according to the variety, specification, shape, and different types of materials to prevent confusion and mutual corrosion.2. It is forbidden to store articles and objects that are corrosive to the forgings nearby.3. A flat object (mostly wood) should be placed at the bottom of a stack of forgings to keep it flat and firm. Although the surface of the forgings has been treated when entering the product warehouse, care should be taken to prevent the forgings from being deformed by moisture.4. Forgings placed in the open air must be padded with wooden pads or other things, and the forgings must be square to prevent bending and deformation. Pay attention to rainy weather.5. When placing the forgings in the forging factory, the stacking height should be controlled at a reasonable height, and the height should be suitable for manual or mechanical operation. There is a past operation channel between a stack of forgings and a stack of forgings.6. The forgings are placed separately according to the order of warehousing so that the principle of first-in-first-mover is implemented for loading and delivery.
