The gear has high hardness and strength after heat treatment, and it is installed in a replaceable bushing together with the shaft to run.5\;10-3m2/s (5-1500cSt) Other liquids similar to lubricating oil.2020-03-31 Gear pump structure characteristics: Gear series pumps are mainly composed of gears, shafts, pump bodies, safety valves, and shaft end seals (magnetic drive can be selected, zero leakage structure). The gears bear low torque during work, the bearing load is small, the wear is small, and the pump efficiency is high.5 times the rated discharge pressure of the pump. The pump is equipped with a safety valve as overload protection. Seen from the extended end of the main shaft toward wholesale sewage pumps the pump, it rotates clockwise. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working. Performance range: suitable for conveying lubricants or properties that do not contain solid particles and fibers, are non-corrosive,the temperature is not higher than 80℃, and the viscosity is 5\;10-6～1. Purpose Gear oil pump is suitable for conveying lubricating oil or properties that do not contain solid particles and fibers, are non-corrosive, and whose temperature is not higher than 80°C, and whose viscosity is 5\;10-6～1. But note that this safety valve cannot be used for long-term operation of a pressure reducing valve, and can be installed on the pipeline when necessary.Application range: It can be used as a transmission and booster pump in a fuel delivery system; it can be used as a fuel pump for delivery, pressurization and injection in a fuel system; it can be used as a hydraulic pump to provide hydraulic power in a hydraulic transmission system; Can be used as lubricating oil pump in all industrial fields;. It can also be adjusted according to actual needs within the allowable discharge pressure range. There are well-designed oil drain and oil return grooves in the pump.5\;10-3m2/s (5-1500cSt) Other liquids similar to lubricating oil. The total return pressure of the safety valve is 1
