X55-3 aluminum powder vinyl water-resistant paint is recommended. After the pot has been used for 5 years, it is recommended to conduct a safety water pressure test. The steam inlet pipe and the water outlet pipe joints are leaking.The interval between subsequent water pressure tests shall be carried out in accordance with the requirements of the technical departments of each region.After 150 hours of use, the oil should be changed for the second time. 5.Maintenance of stainless steel jacketed pot. the pressure gauge and safety valve brewing equipment should be checked regularly, and if there is any failure, it should be replaced and repaired in time.When choosing a tight nut does not solve the problem, add or replace the packing.com. After 50 hours of use, the gearbox should be disassembled to drain the lubricating oil, rinsed with kerosene or diesel, and added 30#-40# clean oil. If the anti-rust oil peels off, it should be painted in time, and the paint of the outer pot should be painted. Wholesale craft beer brewery equipment Factory every 1000 hours of use.
