They are usually utilized when more than 750hp of steam per hour is required. Firetube Boilers: The most commonly used are firetube or shell boilers. The tubes are set in banks in order to let the gases go through the boiler four times before letting out the stack. While the top drum is used for separating water and steam, the bottom drum is used to collect the sludge. About 80% of the boilers that are in use today belong to this particular category. These fuels interact with air and are burned in order to provide the necessary heat needed to convert water into steam. That is when the steam is formed. There are mainly two types of boilers that work in different ways to produce heat. Once the fuel is supplied into the burner and heated up to the required point, the gases or the fire from the fuel is directly released into the boiler to heat up the water. To check the pressure build up, run your boiler for short durations of time. This can happen in one of the two ways depending on the type of boiler used. Since more steam is produced as the temperature increases, it is essential to check the boiler and ensure that excess pressure is not built. Furthermore, they have to be maintained regularly to keep them in optimum working condition. In firetube boilers the fire or hot gases released from the burner are run through within the tubes inside the shell of the boiler with water surrounding them.A boiler is comprised of a separate container called burner, which is attached to it. The firetube boiler systems can release up to 25,000lbs or 750hp of steam per hour.The fuel or hot gases released into the boiler from the burner heats up the water causing the temperature to rise up to 212 degree Fahrenheit.Natural gas is released into the boiler through a special pipe, tank that is pressurized is used to supply the oil while the wood pellets are propelled into Electric Irons for sale the burner. The tubes are vertically arranged in the shell. The steam needed to heat homes, buildings and other structures is created by the fuel that is burned and supplied to the boiler from the burner. Some of the heat is retained in the boiler as the heat required for keeping the building or home warm needs to be regulated, or else they will get overheated.The steam hence produced is piped to a spot where it can be utilized to run the production units, to sanitize an area, to sterilize equipments, to warm up the surroundings, to heat up the water, etc. The steam generated is then circulated throughout the building or home using radiators, vents and pipes, specifically created for heat transferring.