Because the Elevator Handrail Suppliers wire rope is composed of multiple steel wires (for example, the 8*19S structure steel wire rope is composed of 152 steel wires), in the working state, the relative sliding of the steel wire produced by the bending of the wire rope will produce a great friction force. Grease can reduce the friction between the steel wire while ensuring the friction between the steel wire rope and the traction wheel, and effectively extend the service life of the wire rope. 2. All wire ropes produced by Burton (Tianjin) Wire Rope Co., Ltd. have been initially lubricated by a special spraying process, and all the steel wire surfaces are covered with a lubricating layer. If the surface of the wire rope is cleaned after installation, the wire rope must be cleaned in time After lubrication. 3. Clean and maintain the surface of the wire rope regularly (such as half a year or 100,000 operations, depending on the use environment and frequency).Do not use liquids such as cleaning agents to clean the wire rope during cleaning and maintenance, otherwise it will affect the rope The grease content and grease composition in the core further affect the normal use of the wire rope. 4. When cleaning and maintaining the wire rope, brush, cotton yarn, compressed air, etc. should be used to clean the surface of the wire rope. After the wire rope is cleaned up, the surface of the wire rope should be oiled in time with a special grease for the wire rope. 5. Excessive lubrication will make the friction between the wire rope and the traction wheel not guaranteed. The grease on the surface of the wire rope should be thin and uniform (the amount of application varies according to the grease requirements of each company). Remember: elevator wire ropes cannot be used in an oil-free state. Unlubricated wire ropes will seriously affect the life of the wire ropes and traction sheaves.