Cleaning your window split type air conditioner is an essential part of maintaining its efficiency and longevity. To ensure proper maintenance, follow the steps below to properly clean your window split type air conditioner. To start, unplug the air conditioner from the wall. Then, remove the front grille to gain access to the unit. Following this, clean the front and back coils of the air conditioner with a vacuum cleaner. Then, clean the blower blades with a brush. Next, clean the drain pan and drain line with a damp cloth. Finally, reassemble the air conditioner and plug it back into the wall.Before you get started cleaning your split type air conditioner, you need to make sure it is unplugged from the wall. This is an important safety precaution to take in order to avoid any potential electrical shocks or other injuries. Once the power has been disconnected, you can begin the cleaning process. To unplug the air conditioner, locate the power cord and then unplug it from the wall. Make sure the power is completely off before continuing. If the air conditioner is hardwired, you will need to turn off the power at the breaker box. After the power is disconnected, you are ready to move on to cleaning the air conditioner.Clean the front and back coils of your window split type air conditioner as part of the regular maintenance of your unit. Before starting, make sure to unplug the air conditioner from the wall outlet.First, remove the front grille, which will give you access to the front and back coils. With the grille removed, take a vacuum cleaner or blower to clean the coils. Use a soft-bristle brush or a soft cloth to wipe the coils clean. Then, use a coil cleaner or a solution of vinegar and water to thoroughly clean the front and back coils.After the coils are clean, use a high-pressure hose to clean the areas around the coils. Make sure to remove any dust or dirt that has accumulated in these areas as well.Finally, use a cloth to wipe the coils dry before reassembling the air conditioner. Make sure all the connections are secure to avoid any leaks. Once the air conditioner is reassembled and connected to the wall outlet, you can plug it in and start enjoying fresh, clean air.After unplugging your window split type air conditioner and removing the front grille, it's time to clean the blower blades. To do this, you'll need a few basic tools--a screwdriver, a soft cloth, and window cleaner.Begin by locating the blower blades on the air conditioner. The blades are usually towards the back of the unit, and can be easily identified by their fan-like shape.Once you've located the blower blades, use the screwdriver to carefully remove any screws or fasteners holding them in place. Then, use the soft cloth and window cleaner to gently clean the blades. Make sure to pay special attention to the nooks and crannies of the blades, as dirt and debris can often accumulate in these areas.Once you've finished cleaning the blades, use the screwdriver to reattach them in their original position. Now your blower blades are clean and ready to work!