How should we maintain a blow molding machine gear transmission mechanism? 1 There is no box to protect the gear transmission of the blow molding machine, to provide a safety shield to prevent other impurity foreign abuts from falling on the gear; at the same time, the pinion should be immersed in the lubricating oil to ensure that the transmission gear has Good lubrication. 2 Keep the blow molding machine equipment to clean oil, find that there is a metallic powder in the oil to filter or replace it in time. 3 Gear gearboxes are replaced with new lubricants after using 500 hours. 4 When installing or disassembling the gear, it is not allowed to hammer the tooth. 5 When the tooth surface is scratched or worn, it is necessary to use the oil stone to repair the non-smooth portion, and should not be trimmed with a doctor blade or file. 6 When the gear teeth are lubricated with a grease, it is necessary to clean the gear regularly, replace the new grease; avoid the wear of the teeth due to more metal powder in the grease. The temperature change of the gear drive bearing site is often checked. If the bearing temperature is high, the shaft and bearings do not have a malfunction, and the gear is checked to check the gear; it is possible to cause a severe wear of the teeth or the meshing position of the gear.
