No sizing also means no desizing, which reduces the environmental loads even further. Thanks to the brand new EL pattern drive system, the velocity of the TM 4 TS-EL has become increased by about 30 % compared to its predecessor by using manual transmission. For a width of 186 ins as well as a speed of 800 min−1, the TM 4 TS-EL has a daily production rate of about 1, 800 kg of terry fabrics using a weight of 400 g/m2 - 250% greater than on an airjet weaving appliance. The TM 4 TS-EL consumes roughly 87 per cent less energy per kg connected with fabric produced than airjet weaving devices, which require large amounts of energy to offer the compressed air. In exercise, water consumption can be minimized by 9L and energy consumption can be reduced by 0. Following a long gap in what was accessible in the range, the TM 4 TS-EL had been premiered at ShanghaiTex 2015 being a new terry warp knitting unit for processing cotton. webs having long repeats, smooth ends for the borders, and cutting edges. The machine has the standard gauge of E24 for terry flat reed goods. The EL system also enables the pattern to get changed quickly and easily. Warp travel also scores points for sustainability while in fabric production. 6 KW per kg of fabric. Further technical features add KAMCOS system, a brushing unit for aligning the pile loops, as well as a beam frame for large warp beams with long running lengths. A working size of 186 ins has elevated output even further.
