The throttle valve of the ultra-high temperature instant sterilizer can be adjusted. When necessary, the spiral tube can be rotated to align with the overflow tube. When the material enters, it is set in the high temperature barrel. When it returns to the double coil, the material is It enters the inner flow channel and is cooled by the outer cold material, so that the discharge temperature is significantly reduced (generally lower than 65°C). On the one hand, the material is maintained under a certain pressure and its boiling point temperature is increased to prevent vaporization; on the other hand, it is also used to adjust the flow rate. It can also be used for fluid materials. If the process needs to increase or decrease the discharge temperature, the angle shut-off valve can be activated to connect the heat source (steam) or heat source (water or ice water, etc. The ultra-high temperature instantaneous sterilization machine contains a pressure container—a high temperature barrel in the host, which is used to fill pressure steam. The ultra-high temperature instantaneous sterilizer is a hand-controlled sterilizer. When the processing capacity needs to be improved, the 'U'-shaped tube can be removed and a centrifugal pump can be connected. The main setting outside the barrel is a spiral double sleeve, which is used for the cold and heat exchange of incoming and outgoing materials; the main setting inside the barrel is a spiral single tube, which is used to receive heat indirectly. The sterilization process of the material of the ultra-high temperature instant sterilizer: The material enters the outer flow channel of the double coil through the feed pump, and the hot material flowing out from the inner layer is indirectly heated to get preheated.) to the outer flow channel at the lower end of the double sleeve. The upper end of the feed three-way cock is connected with the storage tank, and the lower end is connected with the material source pipeline. The feeding and discharging of the ultra-high temperature instant sterilizer adopts three-way cock, the flow can be adjusted according to the needs, and the use is reliable. The sterilization temperature is adjusted by the angle cut-off valve, and the discharge temperature can be changed by the angle cut-off valve. The steam pressure gauge, sterilization temperature gauge and discharge temperature gauge are all installed on the host. Bright Beer Tank The material is finally removed by the three-way cock. When the high-temperature coil is heated, it is heated to the required sterilization temperature due to the indirect heating of the steam in the barrel, and then the temperature is kept in the single coil outside the barrel to kill the bacteria of the material. Sterilization equipment.At present, it is also widely known and used, but how does the ultra-high temperature instantaneous sterilizer work? Let's learn more about the working principle of the ultra-high temperature instantaneous sterilizer..We all know that the ultra-high temperature instantaneous sterilizer is suitable for instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverages, popsicles, and ice cream slurry, soy sauce, soy milk, condensed milk, alcohol, etc. The lower end of the cock is connected to the spiral tube, and the outlet of the plug will be the storage tank
